HDX - CX2
Features
The HDS CX2 is classic straight thrEad line 'C' configuratian
machine with all invertor controlled low guide wrap reduce the yarn
tension in the texturising zone which ensures the satisfactory
processing of the finer an coarser denier yarn.
Heater and ccaling tracks are installed vertically aver the
machine.
Specifications
(a) Main Specifications
| 1) Productss |
: |
Polyester 30-300 denier |
| 2) Number uf Positions |
: |
240/264/288/312 |
| 3) Mechanical Speed |
: |
400-1000 m/min |
| 4) Draw Ratio |
: |
Optional setting value within the above speed
Range. |
| 5) Direction af Twist |
: |
All "Z" or all "S" or
alternate "Z" and "S" |
| 6) Dimensions |
: |
4150 mm Height |
|
: |
5880 mm width (width over Box Creel) |
|
: |
6540 mm width (width over Rotary Creel) |
|
: |
21345 mm length (Door Closed) |
(b) Utility Electricity
| 1) Electricity |
: |
Motor & Heater circuit |
|
: |
AC 415V ± 2.5%, 50 HZ ± 0.5 HZ, |
|
: |
3 phase plus neutral supply voltage |
|
: |
Earth + GND + Neutral (for safety and noise
suppression) |
|
: |
Motor Max. 103.1 KW |
|
: |
Heater Max. 84.5 KW |
|
: |
Total Max. 187.6 KW |
| 2) Cooling air for panels |
: |
Fan Cooling |
| 3) Air condition (Recommendation) |
: |
Room temperature : 26± 2 0C
Humidity : 65%±5% |
(c) 1st Heater - 26 Block / Machine
| a) Heating System |
: |
Vapour Phase Heater |
| b) Heater Length |
: |
1600 mm |
| c) Rated Output |
: |
2.40 KW / Block |
| d) Temperature Range |
: |
1600C - 2500C |
(d) 2nd Heater - 13 Block / Machine
| a) Heating System |
: |
Vapour Phase |
| b) Heater Length |
: |
1000 mm |
| c) Rated Output |
: |
1.7 KW / Block |
| d) Temperature Range |
: |
1400C - 2300C |
(e) Cooling Zone - 156 Sets / Machine
| a) Cooling Zone Length |
: |
1.25 mt |
(f) Twisting Unit - 312 Sets / Machine
| a) Type |
: |
HITWIST - 1 Trialxial frication unit |
| b) Working disc |
: |
Polyurethane Dise Ø 54.5 X 9 mm. |
| c) Disc configuration |
: |
Standard supply Polyurethane disc -1-4-1 |
(g) Feed Rolls - 312 Sets / Machine
| a) Nip System |
: |
Pressure Roll System |
| b) Yarn Traverse |
: |
Fitted at all feeds |
(h) Take-up Unit - 312 Sets / Machine
| a) Type |
: |
friction drive (HPS) |
| b) Axial & radial disturbance |
: |
Standard (H-Frame Type) |
| c) Biconical angle |
: |
30 or 90 or 180
(90 at delivery) |
| d) Tranverse length |
: |
Max. 250 mm |
| e) Package diameter |
: |
Max. 265 mm |
| f) Package brake |
: |
Automatic braking to aid doffing. |
(i) Oiling Device - 1 Sets / Machine
| a) Type |
: |
Grooved lick roller |
| b) Roll revoution |
: |
Standard Range 2 to 7 rpm
Optional Range 4 to 22 rpm |
(j) Fume Exhaust - 1 Sets / Machine
| a) Place of Installation |
: |
From Top and Bottom of 1st heater |
(k) Yarn Suction - 1 Sets / Machine
| a) Suction System |
: |
By suction blower |
| b) Blower Motor |
: |
7.5 KW |
| c) Tank for waste Yarn |
: |
off end side |
(l) Cutter - 312 / Machine
| a) Cutter |
: |
Yarn end holding type |
| b) Place of Installation |
: |
before the 1 FR |
(m) Detector - 312 / Machine
| a) Detector |
: |
Non contact type (Himson SD3) |
| b) Place of Installation |
: |
Between the 3 FR and the OLR |
(n) Drives & Connected Power
| a) Driving system |
: |
1 set / Machine Individual drive system |
| b) Motors |
|
|
 Input |
: |
05.50 KW X 2 sets / Machine 11.00 KW -
Inverter Drive |
| Int |
: |
15.00 KW X 1 sets / Machine 15.00 KW - Do-
|
| Output |
: |
11.00 KW X 1 sets / Machine 11.00 KW - Do-
|
| Take
up bowl |
: |
11.00 KW X 1 sets / Machine 11.00 KW - Do-
|
| Traverse |
: |
11.00 KW X 1 sets / Machine 11.00 KW - Do-
|
| Twist
unit |
: |
15.00 KW X 2 sets / Machine 30.00 KW - Do-
|
| Ancillaries |
: |
02.20 KW X 1 sets / Machine 02.20 KW |
| Fume
exhaust |
: |
01.50 KW X 2 sets / Machine 03.00 KW |
| Yarn
suction |
: |
07.50 KW X 1 sets / Machine 07.50 KW |
| Total |
|
103.10
KW |
| c) 1st Heater |
: |
64.40 KW |
| d) 2nd Heater |
: |
22.10 KW |
| Total |
|
84.50
KW |
(p) Creel Stand - 1 Set / Machine
|
|
Standard Box Creel for POY size Ø 435
mm max. |
|
|
Optional Rotary Creel. |
(q) Electrical Control System - 1 Set /
Machine
| a) Computer Control |
: |
Micro Processor based control system for |
| System
P.C. |
|
a) Feed roller speed control |
|
|
b) Heater temperature control |
|
|
c) Setting and running condition |
(r) Battery back-up System
| Customer's Scope |
: |
Batteries |
|
|
Connecting Cable |
|
|
Accessories |
|
|
Battery Stands |
|
