HDS - EX2
Specifications
(a) Main Specifications
| 1) Productss |
: |
Polyester 30-300 denier |
| 2) Number uf Positions |
: |
240/264/288 |
| 3) Mechanical Speed |
: |
400-1200 m/min |
| 4) Draw Ratio |
: |
Optional setting value within the above speed
Range. |
| 5) Direction af Twist |
: |
All "Z" or all "S" or
alternate "Z" and "S" |
| 6) Dimensions |
: |
5120 mm Height |
|
: |
7150 mm width (width over Rotary Creel) |
|
: |
19940 mm length (Door closed) |
(b) Utility
| 1) Electricity |
: |
Motor & Heater circuit |
|
: |
AC 415V ± 2.5%, 50 HZ ± 0.5 HZ, |
|
: |
3 phase plus neutral supply voltage |
|
: |
Earth + GND + Neutral (for safety and noise
suppression) |
|
: |
Motor Max. 107.2 KW |
|
: |
Heater Max. 144.0 KW |
|
: |
Total Max. 251.2 KW |
| 2) Compressed Air |
: |
5.5 bar x 70 CFM for Suction Gun (Customer's
Scope) |
| 3) Cooling air for panels |
|
Fan Cooling |
| 4) Air condition (Recommendation) |
: |
Room temperature : 26oC± 2
oC
Humidity : 65%±5% |
(c) 1st Heater - 120 Blocks / Machine
| a) Heating System |
: |
Non Contact Electrical Heater |
| b) Heater Length |
: |
0.95 m |
| c) Rated Output |
: |
1.00 KW / Block |
| d) Temperature Range |
: |
200oC - 600oC |
(d) 2nd Heater - 10 Blocks / Machine
| a) Heating System |
: |
Thermosyphon heater |
| b) Heater Length |
: |
1.46 mm |
| c) Rated Output |
: |
2.40 KW / Block |
| d) Temperature Range |
: |
130oC - 230oC |
(e) Cooling Zone - 240 Sets / Machine
| a) Cooling Zone Length |
: |
1.84 m |
| b) Type |
: |
Forced Cooling |
(f) Twisting Unit - 048 Sets / Machine
| a) Type |
: |
HIMTORO Triaxial discretion disc unit |
| b) Working disc |
: |
Polyurethane Ø 59 mm X 9 mm thick.
|
| c) |
|
Solid Ceramic
Input 6 Disc - Round type Ø 58 mm
Output Disc - Knife type Ø 55 mm |
| d) Disc configuration |
: |
1-7-1 |
(g) Feed Rolls - 048 Sets / Machine
| a) Nip System |
: |
Pressure Roll System |
| b) Yarn Traverse |
: |
Fitted at all feeds |
(h) Take-up Unit - 048 Sets / Machine
| a) Type |
: |
Friction Drive (HPS) |
| b) Axial disturbance |
: |
15 mm |
| Biconical angle |
: |
3o or 9o or 18o
(9o at delivery) |
| d) Tranverse length |
: |
Max. 250 mm |
| e) Package diameter |
: |
Max. 300 mm |
| f) Package brake |
: |
Attachment |
(i) Oiling Device - 1 Sets / Machine
| a) Type |
: |
Grooved lick roller |
| b) Roll revoution |
: |
Standard Range 2 to 7 rpm
Optional Range 4 to 22 rpm |
(j) Fume Exhaust - 1 Sets / Machine
| a) Place of Installation |
: |
From Top and Bottom of 1st heater |
(k) Yarn Suction - 1 Sets / Machine
| a) Suction System |
: |
By suction blower |
| b) Blower Motor |
: |
7.5 KW |
| c) Tank for waste Yarn |
: |
off end side |
d) Compressed Air Assisted Suction
 Gun
for yarn threading |
|
|
(l) Cutter - 240 / Machine
| a) Cutter |
: |
Yarn end holding type |
| b) Place of Installation |
: |
before the 1 FR |
(m) Detector - 312 / Machine
| a) Detector |
: |
Non contact type (Himson SD3) |
| b) Place of Installation |
: |
Between the 3 FR and the OLR |
(n) Drives & Connected Power
| a) Driving system |
: |
1 set / Machine Individual drive system |
| b) Motors |
|
|
| Input
(1 FR) |
: |
05.50 KW X 2 sets / Machine 11.00 KW -
Inverter Drive |
| Intermediate
(2 FR) |
: |
15.00 KW X 1 sets / Machine 11.00 KW - Do- |
| Output
(3 FR) |
: |
11.00 KW X 1 sets / Machine 11.00 KW - Do-
|
| Take
up bowl (WR) |
: |
11.00 KW X 1 sets / Machine 11.00 KW - Do-
|
| Traverse |
: |
11.00 KW X 1 sets / Machine 11.00 KW - Do-
|
| Twist
unit (TU) |
: |
18.50 KW X 2 sets / Machine 37.00 KW - Do-
|
| Ancillaries |
: |
02.20 KW X 1 sets / Machine 02.20 KW |
| Fume
exhaust |
: |
07.50 KW X 2 sets / Machine 07.00 KW |
| Yarn
suction |
: |
05.50 KW X 1 sets / Machine 05.50 KW
|
| Total |
|
107.20
KW |
| c) 1st Heater |
: |
120.00 KW |
| d) 2nd Heater |
: |
24.00 KW |
| Total |
|
144.00KW
|
(o) Creel Stand - 1 Set / Machine
| Maintenance Platform &
Ladder 1 Set / Machine |
(p) Electrical Control System - 1 Set /
Machine
|
|
Standard Box Creel for POY size Ø 435
mm max. |
|
|
Optional Rotary Creel. |
(q) Electrical Control System - 1 Set /
Machine
| a) Computer Control |
: |
Micro Processor based control system for |
| System
P.C. |
|
a) Feed roller speed control |
|
|
b) Heater temperature control |
|
|
c) Setting and running condition |
(r) Battery back-up System
| Customer's Scope |
: |
Batteries |
|
|
Connecting Cable |
|
|
Accessories |
|
|
Battery Stands |
|
